 |
|
Small house or cottage DC distribution / controller protection panels:
|
Basic DC branch circuits, small inverter disconnect,
along with all controllers protection and shunts
in One Single Box, our "RESID" DC Controller /
Distribution Panels is the solution.
Designed for easy installation of controllers, load distribution, small inverter and shunts in small residential and cottage. It just fill a market niche left by big systems manufacturers for small affordable systems. Customize a standard panel with your own specified breakers, busbars, fuses, monitor shunts and other electrical devices.
DC distribution and controlers outputs are connected together on one Positive Busbar via UL489 DIN Rail mount breakers and Negatives on supplied busbar. DC side of small Inverter (up to 125A) disconnect with UL489 breakers for code compliant installation.
Main features:
• Easy installation of many controllers and DC distribution to branch circuits on positive common bus
• Group all DC wiring and devices in and around one single box
• Inverter disconnect in the panel
• Main turbine brake option
• Shunt position and fusing possible on taller H panels.
• Different sizes of knockouts all around panel
 |
|
|
|
Resid 12DC basic panel:
Features:
• Easy installation of controllers on positive common bus
• DC distribution to branch circuits on positive common bus
• Installed 12 position DIN Rail for breakers
• Small Inverter breaker disconnect up to 60A
• Negative Busbar box lugs
• 2 Grounding box lugs
• Polyurethane Gray painted strong Steel enclosure
• Different sizes of knockouts all around panel
• Hinged door with sloted lock
• Standard breakers ID and safety labels
• Two year limited warranty
• Dimensions: 12" high x 12" wide x 4" deep
30 cm high x 30cm wide x 10cm deep
OPTIONS:
• UL489 DIN Rail mount controller / branch distribution breakers
with values of your choice
• Positive busbar for breakers
• Breakers Interlock for wind turbine brake
12DC Panel:
US$ 119.99
|
Shown with all options offered:
|
|
Resid 12DC-H extended panel:
Features:
• Taller cabinet for devices installation
• Easy installation of controllers on positive common bus
• DC distribution to branch circuits on positive common bus
• Installed 12 position DIN Rail for breakers
• Small Inverter breaker disconnect position up to 125A
• Negative Busbar box lugs
• 2 Grounding box lugs
• 500Amp Shunt position
• Positive and Negative battery cable studs position
• Internal fusing possible
• Polyurethane Gray painted strong Steel enclosure
• Different sizes of knockouts all around panel
• Hinged door with sloted lock
• Standard breakers ID and safety labels
• Two year limited warranty
• Dimensions: 16"High x 12" wide x 4" deep
40.6 cm high x 30cm wide x 10cm deep
OPTIONS:
• UL489 DIN Rail mount controller / branch distribution breakers
with values of your choice
• Positive busbar for breakers
• Breakers Interlock for wind turbine brake
• Surface mount UL489 breaker for up to 125A inverter disconnect
• 100A and 500A Current shunts
• Positive and Negative studs for battery cable ring connectors
12DC-H Panel:
US$ 154.99
|
Shown with all options offered:
|
|
Optional items to complete your panel:
DIN rail Breakers with values of your choice:
We use standard DIN Rail hydraulic/magnetic circuit breakers UL 489 Listed for Branch distribution. They are compact and temperature stable, designed for precision operation in green energy markets requiring branch and controller protection.
5-60A @ 80VDC
13 mm (about 0.5") wide
Mounts on 35mm DIN-rail
UL 489 Listed for branch distribution
CSA 22.5 No. 5-02 certified for branch distribution
Will trip with continuous current over 105% of rated value
Interrupting capacity 10,000 A
Operating temperature -40…+65°C-
BI option: Din Rail breaker, installed in your panel on included positive busbar
|
|
BKR-5: 5 Amps Din Rail breaker
US$ 24.69
|
BKR-5-BI: 5 Amps Din Rail breaker installed on positive busbar
US$ 26.69
|
|
BKR-10: 10 Amps Din Rail breaker
US$ 24.69
|
BKR-10-BI: 10 Amps Din Rail breaker installed on positive busbar
US$ 26.69
|
BKR-15: 15 Amps Din Rail breaker
US$ 24.69
|
BKR-15-BI: 15 Amps Din Rail breaker installed on positive busbar
US$ 26.69
|
|
BKR-30: 30 Amps Din Rail breaker
US$ 24.69
|
BKR-30-BI: 30 Amps Din Rail breaker installed on positive busbar
US$ 26.69
|
BKR-60: 60 Amps Din Rail breaker
Can be used for small inverter disconnect up to 300-500W
at 12 volts or 600-1000 Watts at 24 volts
US$ 24.69
|
BKR-60-BI: 60 Amps Din Rail breaker installed on positive busbar
Can be used for small inverter disconnect up to 300-500W
at 12 volts or 600-1000 Watts at 24 volts
US$ 26.69
|
|
|
Surface mount Breakers for inverter disconnect:
Hydraulic/magnetic circuit breakers with box lugs. They are compact and temperature stable designed for precision operation in green energy markets requiring Inverter disconnect.
• Mount on panel bottom with front connections for easy wiring
• Box lug accept wiring from #14 to 1/0 AWG
• 125A @ 125VDC
• UL 489 Listed for branch distribution
• CSA Standard C22.2• Box lug accept wiring from #14 to 1/0 AWG
• -BI option: panel mount breaker, installed in your panel on positive busbar and include a battery positive stud
|
|
BKE-125: 125 Amp panel mount breaker
Can be used for small inverter disconnect up to 800-1200 Watts at 12 volts or 1600-2400 Watts at 24 volts |
US$ 75.99
|
|
BKE-125-BI: 125 Amp panel mount breaker installed on positive busbar with battery positive stud
Can be used for small inverter disconnect up to 800-1200 Watts at 12 volts or 1600-2400 Watts at 24 volts |
US$ 90.99
|
|
|
Green energy supply and current flow monitoring with the Microlog DMM-32:
We designed the perfect little Battery and DC current monitor at an affordable price. Check the battery bank critical voltages and current circulation in the system at glance, find charging problems or Phantom power losses. Two current inputs for separate charge and discharge system current. Can be used on the panel or remote, with an extremely low current consumption, so low you can leave it ON all week...
FEATURES:
• Protect your batteries against deep discharge
• Accurate 1 battery bank voltage measurement
• System Charge, Discharge or NET current measurement
• One Amp imput for a 100A shunt, one for a 500A or 100A shunt
• Very low current draw (wont drain batteries)
• Red Backlit Display
• Simple: press the right button for inputs(Battery voltage default display)
• Polycarbonate facing
• Corrosion treated Printed Circuit Board
• Surface Mount Technology with sealed trimers
• Stainless steel hardware for marine environment
• Easy to install and operate (No Programming)
• Two year limited warranty
|
DMM-32-BR for 1 Battery + 2 Amp inputs:
US$ 114.99
|
The SH-100-RI Shunt is required if you need to measure current up to 100 AMPS.
For systems with maximum current 65 amps continuous with no overloads, or 50 amps continuous with overload to 100 amps for 8 seconds max. These are suitable for small systems, or for most applications where you want to measure only solar or wind turbine input current. It allows "amps" readings as low as 0.1 Amp.Installed in panel with wiring to negative busbar and connectors. |
US$ 43.99
|
The SH-500-RI Shunt is required if you need to measure current up to 500 AMPS.
For systems with maximum current 330 amps continuous with no overloads, or 250 amps continuous with overload to 500 amps for 8 seconds max. These are suitable for high current Inverters consumption, charging alternator, solar panels, wind turbines and NET Amps. It allows "amps" readings as low as 1 Amp on A2 input position. Installed in panel with wiring to negative busbar and connectors. |
US$ 51.99
|
|
BP-251-I: Add this Post for battery lugs if needed on positive or negative. Not needed on negative if you install a 500 shunt.
1 x 5/16" connector post - 250 Amp, 48 Volts DC
Installed in panel with wiring to busbar and connectors. |
US$ 11.99
|
Shipping options requested:
Please click here for purchasing policies and shipping options: |
|
