 |
|
We have a Clearance on some items...
Limited quantities left, just add to cart and we will refund your credit card for out of stock items
|
Bussman Hi-Amp main breaker System :
This is the standard Bussman Manual & Switchable Reset Circuit Breakers. Use for Main panel protection close to battery or windlass surge protection. You can reset manually and replace main battery switches with those models.
|
 |
HI AMP- 187 SERIES MRCB MARINE BREAKERS
Product Description:
Combines switching and circuit protection into a single device All components meet SAE J1171 external ignition protection requirements Clear, single lever operation "Trip Free" design cannot be held "ON" during fault current condition Vaporproof and Waterproof Recessed mounting holes for clean appearance Large clearance around terminal studs accept heavy gauge wire lugs Robust 5/16 terminals provide high torque connections Large lever with vertical/horizontal orientation provides indication of trip status Ignition protected - Safe for installation aboard gasoline powered boats.
Features and specs:
Single Pole Thermal Type Breakers
Applications:Typically used in DC power systems in marine applications (as a main or branch circuit breaker), truck and bus systems, RV systems,add-on protection for accessories, lift gates, etc. This unit is external ignition protected and weatherproof.
Rating: 25-150A, 48VDC.
Interrupt Rating: Main Breaker Protection Interrupt Rating (5kA@ 12VDC). (Consult factory for higher voltage interrupt ratings.)
Operating Temperature Rating: –40°F (–40°C) to 185°F (85°C).
Storage Temperature Rating: –40°F (–40°C) to 260°F (125°C).
Materials:Black UL-Rated 94V-0 thermoset plastic body. Cover and lever are UL-Rated 94V-0 thermoplastic.
Marking:Standard marking includes amp/volt ratings. Custom markings also available.
Termination: 5/16-18 threaded studs.
Torque Rating: 75in-lbs (8.5Nm) max.
Mounting Torque Rating: Panel or surface-mount options; 50in-lb (5.6 Nm) max.
Ingress Protection Rating: IP66.
Features / Options: Amanual reset circuit breaker with On-Off switch capability.
Compliances:ABYC E-11; CE; SAE J1171 (Ignition Protected). |
 |
HIS-50 Hi-Amperage ignition proof Surface Mount circuit breaker - 50 Amp: |
US$ 49.95
|
|
|
HIS-100 Hi-Amperage ignition proof Surface Mount circuit breaker - 100 Amp: |
US$ 49.95
|
|
 |
HIP-50 Hi-Amperage ignition proof Panel Mount circuit breaker - 50 Amp: |
US$ 49.95
|
|
|
HIP-100 Hi-Amperage ignition proof Panel Mount circuit breaker - 100 Amp: |
US$ 49.95
|
|
|
 |
|
HI AMP- 185 SERIES MARINE BREAKERS
Features and specs:
Single Pole Thermal Type Breakers
Ratings: 25A to 150A; 30 VDC, 3000 Amp Interrupt Capacity.
Operating Temperature: –25°F (–32°C) to 180°F (82°C).
Storage Temperature: –30°F (–34°C) to 300°F (149°C).
Series 185 are sealed for engine compartment and bilge area applications.
Housing: Thermoset plastic; UL rated 94VO; 311°F (155°C). Stud insulators
are provided on covered units with F (Surface Mount) bases.
Mounting: Panel or surface.
Indicator: Series 185 have a unique reset mechanism which provides
visible indication of tripped condition.
Approvals: Complies with SAEJ1625
|
 |
Hi-50- Hi-Amperage ignition proof Surface Mount circuit breaker - 50 Amp: CLEARANCE: |
US$ 22.95
|
|
|
Hi-100- Hi-Amperage ignition proof Surface Mount circuit breaker - 100 Amp: CLEARANCE: |
US$ 22.95 |
|
 |
Hi-135-P- Hi-Amperage ignition proof Panel Mount circuit breaker - 135 Amp: CLEARANCE: |
US$ 22.95 |
|
|
|
|
|
|
|
|
Standard "A" style breakers from Carling Technologies:
We sell the same standard Magnetic-Hydraulic Circuit Breakers used by many manufacturers.
Features and specs:
Single or Dual-Pole Magnetic-Hydraulic Type Breakers
White handles
250 VAC, 50/60 HZ, or 80VDC MAX
#8-32 screws for 5-30 Amp values, #10-32 screws for 40 or 50 Amps
Stock Values:
|
|
|
|
ANL Fuses System :
This series of vehicle fuse assemblies consists of two parts: fuses and bases.
The fuse can be fastened to an installed fuse base for convenient fuse exchange.
The fuse is a CNN type, which can be also connected directly to the bus bar, saving the fuse base.
Fuses and bases are sold as separate items.
Features and specs:
• Protection against overloads and short circuits in electrical lines and equipment.
• There is a visible indication of a blown condition
• Rated voltage up to 48 VDC or 125 VAC 50-60Hz
• Rated current up to 500 amperes
• Interrupt capacity up to 6000 ADC
• Fuses metal parts are Tin Plated Brass or Copper
• Strong High Temperature Ceramic Fuse Base, closed underside
• Stainless steel Hardware on Fuse Base
• Base Mount with 2 #10 screws
|
|
ANL-FH ANL Fuse Holder: |
US$ 13.95 |
|
|
ANL-50 ANL Fuse - 50 Amp: |
US$ 11.95 |
|
|
ANL-80 ANL Fuse - 80 Amp: |
US$ 11.95 |
|
|
ANL-100 ANL Fuse - 100 Amp: |
US$ 11.95 |
|
|
ANL-125 ANL Fuse - 125 Amp: |
US$ 11.95 |
|
|
ANL-150 ANL Fuse - 150 Amp: |
US$ 11.95 |
|
|
ANL-200 ANL Fuse - 200 Amp: |
US$ 11.95 |
|
|
ANL-500 ANL Fuse - 500 Amp: CLEARANCE: |
US$ 9.95 |
|
|
|
|
|
|
|
|
|
Shipping options requested:
Please click here for purchasing policies and shipping options: |
